MegaTunix License Code & Keygen Download MegaTunix supports the following controller types; MS1 / MS1-Extra / MS2 / MS2-Extra (requires JimStim) FreeEMS JimStim For the following controller types; MegaTunix strives to be a complete tuning tool for the vehicle, particularly when the vehicle is equipped with a MegaSquirt powered Fuel Injection system. Target Audience: Some of the current program features will be aimed at users who are more technically minded, with a strong background in Automotive Electronics / Electrical Engineering / Mechanics. There are many other features of MegaTunix which are not presented in this online User's Guide, but are documented in the readme.txt file included with the download. MegaTunix Overview: The website given below is hosted by MegaTunix, Inc and uses the HyperMedia HTTP protocol and all MegaTunix download files use the MegaTunix_win32 directory. MegaTunix Installer - Page 1: 1. Download the installer file, MegaTunixSetup.exe, which is contained in the MegaTunix_win32 directory. 2. Double click the downloaded file. 3. Follow the instructions to install MegaTunix. Note: If you are unable to install MegaTunix via double clicking on the file, you may need to manually run the installer from the command line. To do this, double click on the downloaded file in a command prompt window as follows: Note: The -p parameter is not used with MegaTunix 4.0, nor with MegaTunix v2.0. The -p (POINT) parameter is only used with MegaTunix v2.0. MegaTunix Backup (Test1) - Page 1: 1. Run the MegaTunixBackup.exe file in the MegaTunix_win32 directory. 2. Click the "Backup" button in the menu. 3. Click the "Backup complete" button in the menu. Note: The Backup option does not add any additional checkpoints to the saved configuration, but creates an XML file that may be used for future repairs. MegaTunix Restore (Test2) - Page 1: 1. Run the MegaTunixRestore.exe file in the MegaT MegaTunix Download X64 MegaTunix Download With Full Crack 5.0.0 (2012-08-11) - Multicore support on Linux and 64bit Windows. (CentOS 6.3 64bit Debian 7.0 64bit) - Added Multi-threading to speed up performance. (Up to 30% increase in speed) - Added new MS2-Pro version - Added very good compatibility with JimStim - Fixed a bug on the ECU display where the offset was written with garbage. - Fixed an issue with the auto-set value for the misfire limit and other parameters. - Fixed the "No POST" Error Message - Fixed a bug with the launchpad accuracy, now it has the default value again. - More improvements and clean-up. MegaTunix Product Key 4.0.2 (2012-07-27) - Fixed a bug on the engine calibration when new values are set. - Modified the engine calibration process. - Fixed a bug on the launchpad. - Fixed a bug with the ECU display. - Removed a "Test verification" feature, it is now in the config menu. - Fixed a bug where the new speed settings could not be saved. - Many improvements. MegaTunix Cracked Version 3.0.2 (2012-07-20) - Fixed a bug where the old speeds were set on the launchpad. - Updated the MS2-Pro to the latest update. - Added a new function for the launchpad that allows to set the throttle position at the start of the engine. - Improved the MS2-Pro. - Many improvements. MegaTunix 2.0.4 (2012-07-16) - Fixed a bug where newer versions of.exe files can not be used. - Updated the MS2-Pro, now it should always set the values. - Added extra tuning features to the MS2-Pro (Launchpad Accuracy and calibration values for the Launchpad). - Several bugfixes. MegaTunix 2.0.3 (2012-07-04) - Fixed a bug on the launchpad accuracy. - Fixed a bug on the speed limiter settings. - Fixed a bug on the unlock protection where a complete reset was done. - Some other bugfixes. MegaTunix 2.0.2 (2012-06-21) - 91bb86ccfa MegaTunix With Serial Key This app was designed to make it easier for users to configure their engine and add new programs without having to write programs on their own. MegaTunix will allow you to tune you engine and add new programs for the entire MegaSquirt or FreeEMS ECU systems. It will allow you to edit the CAM files, read your logs and use all the functions that are available to the user when running HAAI software directly on your engine. It is designed to be easy to use for the beginners but provides all of the options that could be used by the hardcore HAAI user. Features: * Read your log files and add them to the list of tuning parameters of the tuning application. * Add user defined scripts, programs and maps to your tuning profile. * Allow changes to be made on a running engine. * Edit the CAM files. * Change the tune manually or auto-execute commands. * Connect to and display messages from HAAI modules. * All logging and tuning is done via config files that are stored in the users home directory. * When connected to FreeEMS or JimStim servers, you will be able to play back the settings of the user and update to apply the changes on a running engine. * Download data from the MegaSquirt or FreeEMS ECU (Chrono or the OBC) * Attach the program to the engine based on the running RPM * Locate the motor on the drive and apply the settings. * Watch a running engine update the log file. * Monitor RPM as well as the coolant temperature. * Monitor intake and/or fuel pressure. * Output show all tuning parameters. * Output all logs from the engine. * Change available programming functions and settings. * Edit all tuning parameters. * If the engine is supported by the JimStim software, you can connect and use it's functions. * Allow users to create their own maps. * Read user-created maps. * If the engine is supported by the JimStim software, you can program the engine with maps generated by the JimStim software. Download MegaTunix: 1) Download the zip file and unzip it in the directory where you want to install the application. (if you already have the zip file in your hard disk, the file is probably unzipped and therefore you don't need to repeat the process) What's New in the? The main feature of the application is to run a tuner that can automatically configure and recalibrate itself, based on fuel type and response. A Tuner (TunA to TunF) is chosen based on the current model, and all the other necessary components are installed. MegaTunix supports configuration over the RS232 serial port, web interface and a USB external Flash memory interface. In either case, all the information is stored in a SD card, which must be plugged in the PC by the user (this is done for the FTP server and the charts). The server provides the following features: - Change between tuner controllers - Permit user to change between multiple tuners (the tuner selection page doesn't require the user to change to the next page to select another tuner) - Download and save charts and tables - Permit user to save settings and data to the SD card - Permit user to configure the FTP server MegaTunix Features: - FreeEMS features (memory, fieldbus, statics, full speed charts and left half RPM) - JimStim features (memory) - Example with configuration over RS232, over web and USB Flash - Example with configuration over RS232 and USB Flash - Show graph ranges - Auto configuration to current tuner (TunA and TunF) - Auto configuration to current tuner and memory range - Show the fuel map - Show the factory ECU calibration log - Show the OSD resolution and clock rate - Show left half and right half RPM - Shows all available models - Configure the FTP server - Upload and download charts and tables from the FTP server - Download tables and charts - Upload charts and tables - Upload charts and tables with filter conditions - Download charts and tables with filter conditions - Upload charts and tables with filter conditions - Download charts and tables and save to SD card - Upload charts and tables and save to SD card - Upload charts and tables and save to SD card with filter conditions - Upload charts and tables and save to SD card with filter conditions - Upload charts and tables and save to SD card with filter conditions - Upload charts and tables and save to SD card with filter conditions - Upload charts and tables and save to SD card with filter conditions - Download charts and tables and save to SD card - Upload charts and tables and save to SD card - Upload charts and tables and save to System Requirements For MegaTunix: -OS: Windows XP, Windows 7, Windows 8, Windows 10, MacOS X (10.9 or higher) -CPU: Dual core CPU (Intel Core 2 Duo E6600 or AMD Athlon X2 64 X2 5600+) -Memory: RAM 4 GB or higher -Video Card: DirectX 9.0c or higher. -Hard Disk: 1 GB available space -DirectX (DX11 or higher) -For "Anti-aliasing", you can use settings from "
Related links:
Comments